UPS (APC)

Part No: N1D2710191122

Product: Online UPS,

Capacity: 10 KvA

***Unity output power factor single-phase, double-conversion online UPS with advanced management features.

***Proven performance with the world’s largest installed base of single-phase, double-conversion products. Rack mount and tower SRT 2.2 kVA – 10 kVA

• Standard features
• Best-in-class power density
  More real power in watts, 0.9 pf on 2.2 kVA – 5 kVA,
  Unity on 6 kVA – 10 kVA units.
• High-efficiency “green mode”
  Achieves 98 percent efficiency, which saves
  utility and cooling costs without compromising
  performance or reliability.
• Graphical LCD display with multi color back light
  Intuitive interface provides detailed and accurate
  information with ability to configure locally.
• Intelligent battery management
  Temperature-compensated charging extends life
  and advanced algorithms recommend replacement
  date. The UPS can inform user which batteries need
  to be replaced and auto detect when additional
  battery packs are added.
• Built-in energy meter
  Measures energy use and displays UPS
  efficiency in various modes of operation for easy
  energy tracking.
• Operate without battery
  Ability to immediately protect equipment when
  power returns after a complete discharge of
  the battery.
• Three-year warranty on electronics
  Additional year of warranty protection
  for electronics provides peace of mind
• 
• Embedded network management card with
  environmental monitoring (5 kVA – 10 kVA models)
  Remote monitoring and control of the UPS and
  the environment via Ethernet connection while
  freeing up the Smart Slot TM so customers can add
  accessories for additional communication options.
  Switched outlet group(s)
  Ability to control a group of output load receptacles
  independent from the main UPS. Enables:
  • Rebooting hung device without cycling
  the entire UPS
  • Sequenced turn ON/OFF
  • Shedding of noncritical loads based on a variety
  of parameters (battery time, run time remaining,
  and overload)
  • Scheduled time OFF to conserve energy
  Emergency power off
  Remote UPS shutoff in the event of a fire or other
  emergency. The UPS can accept normally open
  (NO) or normally closed (NC) contacts.
  Communication ports
  Serial, USB, Ethernet, and Smart Slot for network
  accessory cards.
  Communication protocols
  Mod bus serial, USB Power Summary, HTTP, SNMP,
  and Telnet.
  1:1, 3:1 input hard-wire options
  Product can be wired for 3-PH or 1-PH input
  (230 V, 8 kVA, and 10 kVA models only).
  Dual input
  Enables second input source to be connected to
  UPS bypass (230 V, 8 kVA, and 10 kVA models only).

*** Intuitive, easy-to-use LCD provides clear and accurate information in multiple languages.

Standard features
LCD display screen
Accurately provides real-time status updates in
your choice of basic or advanced menus.
UPS status (scrolling)
• Output voltage
• Input voltage
• Output frequency
• Run time
• Load
• Battery health
Control
• UPS and outlet group settings
• Bypass control
Configuration
• Output voltage, frequency
• Language, brightness, contrast
• Alarm volume
• IP address
Test and diagnostics
• Initiate battery and run time calibration tests
About
• UPS serial number, battery part number
• Battery install and suggested replacement dates

*** Product accessories

Management cards
• AP9630: UPS network management card
with Power Chute network shutdown
• AP9631: UPS network management card
with Power Chute network shutdown and
environmental monitoring
• AP9335TH: APCTM by Schneider Electric
temperature and humidity sensor
• AP9810: APC dry contact I/O accessory
• AP9624: UPS interface expander
• AP9613: Dry contact I/O Smart Slot card
Battery packs
• SRT192BP: APC Smart-UPS SRT 192 V 5 kVA
and 6 kVA battery pack
• SRT192RMBP: APC Smart-UPS SRT 192 V 5 kVA
and 6 kVA RM battery pack
• SRT192BP2: APC Smart-UPS SRT 192 V 8 kVA
and 10 kVA battery pack
• SRT192RMBP2: APC Smart-UPS SRT 192 V
8 kVA and 10 kVA RM battery pack
• SRT72BP: APC Smart-UPS SRT 72 V 2.2 kVA
battery pack
• SRT72RMBP: APC Smart-UPS SRT 72 V 2.2 kVA
RM battery pack
• SRT96BP: APC Smart-UPS SRT 96 V 3 kVA
battery pack
• SRT96RMBP: APC Smart-UPS SRT 96 V 3 kVA
RM battery pack
• SRT002: APC Smart-UPS SRT 5 M extension cable
for 192 VDC External Battery Packs 5/6 kVA UPS
• SRT003: APC Smart-UPS SRT 5 M extension cable
for 192 VDC External Battery Packs 8/10 kVA UPS
• SRT009: APC Smart-UPS SRT 5 M extension cable
for 72 VDC external battery pack 2.2 kVA UPS

• SRT010: APC Smart-UPS SRT 5 M extension cable
for 96 VDC external battery pack 3 kVA UPS
Rail kits
• SRTRK2: APC Smart-UPS SRT 19 inch rail kit
for Smart-UPS SRT 5/6/8/10 kVA UPS
• SRTRK3: APC 2-post mounting rail kit for
Smart-UPS SRT 2.2/3/5/6/8/10 kVA UPS
• SRTRK4: APC Smart-UPS SRT 19 in rail kit for
Smart-UPS SRT 2.2/3 kVA UPS
Backplate kit
• SRT001: APC Smart-UPS SRT 5 kVA output HW kit
• SRT012: APC Smart-UPS SRT 2.2/3 kVA
input/output HW kit
Transformers
• SURT001: APC Smart-UPS RT 3,000 VA 230 V
SURT002: APC Smart-UPS RT 5,000 VA 230 V
isolation transformer
• APTF10K W01: APC W W 10 kVA
isolation transformer
Service bypass panels
• SBP6KRMI2U: APC service bypass panel 230 V;
50 A; MBB; hardwire input; (4) IEC-320 C19 output
• SBP10KRMI4U: APC service bypass panel 230 V;
100 A; MBB; hardwire input; IEC-320 output (8)
C13 (2) C19
Other
SURT013: SURT Equipment Cart
Replacement Battery Cartridge
APCRBC140: RBC for SRT 5 kVA – 10 kVA UPS
APCRBC141: RBC for SRT 2.2 kVA UPS
APCRBC152: RBC for SRT 3 kVA UPS